HPRO MZ

Temperature and humidity control up to 4 zones

AXA pump the heart of HPro MZ

The revolution in the misting market

Discover more...

Eddy5 control available for HPro MZ

Innovative control panel always ON

Discover more...

HPro VFD: low consuption, variable speed

The misting in multiple zones

HPro MZ: made in italy

Internal production in our factory in Milan

Take a look...

HPro MZ: mechanical features

Covered by specific patents on the by-pass, it allows a wide range of flow rate, sturdiness and resistance to wear
Low rotation speed axial pump. Low impact vibrations, friction and sound emission
Protects from atmospheric agents and prevents tampering
Optionally available in two flow sizes, it proportionally mixes water-soluble substances
automatic luxation to evacuate air bubbles and still water. It can be combined with an automatic cyclic bactericidal sanitization system. Prevents bad odors and reduces the risk of Legionella
In the presence of prolonged voltage drops, the motor overheats. The thermal protection stops the control unit preventing damage

HPro MZ: electronic features

It manages all set-up parameters, room values, alarms, warnings and is equipped with a dedicated web interface. It is the most advanced on the market
The pump carries out a self-check-up at each operation and reports any anomalies. The parameters verified are related to temperature, pressure, current, water flow
Provides instant reading of average pressure values ​​on the display. In the HPro series it allows the setting of minimum and maximum alarms to prevent leaks and occlusions
Allows early start and delayed shutdown of the ventilated flow, to better dissipate the mist and prevent excessive humidity
The metering of the operating hours activates the audible and visual warning, which communicates the periodic maintenance threshold of the pump.
To calibrate or equate with other instruments present, it is possible to carry out an intentional calibration of the standard values ​​detected by the probe of the nebulizing control unit
revised in the HPro models, this command allows you to read anomalous engine overheating and indicates the temperature value on the display
With a clean ON/OFF type connection it is possible to connect/subordinate the switching on of the nebulizer pump to other devices (e.g. AHU and Chiller)
Simple radio control for remote ignition. Useful when the control unit is not close to the user
The unit is equipped with a digital flow meter which instantly indicates the precise water flow rate at the moment of reading

HPro MZ: programs built-in

Each time the machine is turned on, it carries out an automatic check and in the presence of anomalies, it indicates the anomaly on the display, stopping operations.
It allows you to nebulize less frequently, the closer the set-point values ​​are. This 'curve' optimizes yield and prevents excess misting
The electronics support a calendar where you can set on and off times. With or without weekend
Cyclic timer that allows operation with nebulization at time intervals. It is used to regulate the quantity of nebulized water for different temperature needs between morning/evening
Precision digital control with manual or automatic program
Precision digital control with manual or automatic program. It can operate in open, closed environments or in air treatment ducts (UTA)
Available in the HPro Series, it allows you to set minimum and maximum pressure thresholds to which warnings and alarms correspond
With an RS486 type connection, it is possible to interface the nebulizer pump to external systems, managing with the desired interface
It stores the partial and total times of actual activity of the pumping unit and the ventilating bodies, depending on the maintenance choices

Download our latest datasheet with all the spec's and advanatges of the HPro MZ model

Thanks to the futuristic AXA ​​pump it is possible, HPro MZ has a water flow rate from 0.5 l/min to 20 l/min.

Spec's

The data in the following table may change without notice

ModelE305E306E307
Pressure (Bar)70-10570-10570-105
PumpSIMMM AXASIMMM AXASIMMM AXA
Min Flow rate (Lt/min)1.21.905.70
Max Flow rate (Lt/min)4.689.820
Motor Speed (rpm)1.4501.4501.450
Voltage (volt)230/115 50/60 Hz.230/115 50/60 Hz.230/115 50/60 Hz.
Power (Kw/h)0.920.921.90
Max daily use (hours)242424
Weight (kg)363636
Dimensions (cm)65x44x4265x44x4265x44x42
Stay in touch with us Contact US

Fill in the fields below and you will be contacted as soon as possible.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of service apply.
Misting Systems for Industrial, Commercial, and Residential Applications | Natural Cool

Natural Cool is a division of SIMMM Engineering, iItalian company that operates on national and international markets with the highest quality trends.

At Natural Cool, we are dedicated to providing high-quality misting solutions that improve air quality, reduce energy costs, and enhance the comfort of your space.

 
 
Our contacts
Via A. Martini 6-8-10
Cinisello Balsamo - Milano (Italia)
Phone: +39 02 66011851
Fax: +39 02 66015092
Email: